How to Turn Your Favorite Photo into a Miniature Masterpiece

by Bill Jones

After looking at all the amazing tilt-shift images from our previous post, I’m sure you are ready to create some of your own. It’s really very simple to do. It can be accomplished in just a few easy steps. I am using Photoshop to create this tutorial but I’m sure it can be adapted for other photo applications. Lets get started.

First you want to select a photo that will work for this technique. You want to use a photo that has the perspective of looking down on the subject matter. This will make the effect more believable.

Here is an image I will be working with from Dr. Antonio Comia via Flickr. Please check out other images from this talented photographer.

Ok, lets get started. First open up your image in Photoshop. Once open, select the Quick Mask Mode from your toolbar or hit Q.

Next, with the Quick Mask Mode selected click on the Gradient Tool or hit G.

Select the Reflected Gradient Button and make sure your gradient runs from black to white as shown.

Draw a vertical line from the center of the area you want in focus to the point where you want the blur to start. It will probably take a few times to get it the way you want.

Next step is to go back into Standard Mask Mode by clicking the Quick Mask Mode again or hitting Q. Note: These are instructions for Photoshop CS4. CS3 has a separate button for Standard Mask Mode.

Once in Standard Mask Mode we are going to apply a Lens Blur to the image. Go to Filter>Blur>Lens Blur.

Now it’s time to experiment with the Lens Blur setting to get what you want. When you are satisfied hit OK.

To take it a step further and give your image more of a plastic look, play around with the saturation and contrast of the image. Here is my final image after some tweaking to the saturation and contrast.

That was easy wasn’t it! Just a few steps for a very cool effect. Have fun making your own miniature scenes!

Master Realistic Eye Editing in Photoshop

by Christopher O’Donnell

Whether your model has that early-morning blur to their eyes or your shooting conditions were less than optimal, almost every portrait could benefit from bit of Photoshop eye assistance. By following these steps, you can achieve clear, vibrant, and piercing eyes all within fifteen minutes of post process work.

1. Click Layers > Duplicate Layer, then apply a layer mask by clicking on the icon on your layers palette toolbar (Figure 1). Select the Clone Stamp tool, and with a steady hand, clone out any unwanted or distracting reflections (unless you think they add to the portrait in some way). You may need to increase the brush hardness of your clone stamp (right-clicking on the photo will bring up the appropriate menu) when working along sharper edges, such as the pupil or the eyelids. It would also be good to clone out any redness in the whites of the eyes as well.

The layer mask is useful in case you over-do it with your cloning: for example, if you clone with too soft of a brush on the whites of the eyes and need to mask in the eyelids a bit.

2. When finished, if you did not use your layer mask, just delete it by right-clicking the mask and selecting Delete Layer Mask.

If you did use it, then you will need to merge down a layer so that our new effects will be applied to a layer with 100% uniform transparency. To do this, click on your base layer and duplicate it. The duplicate layer should appear right beneath the top layer (the one you just masked). Now right-click on the top layer and select Merge Down to combine both layers into one.

3. Let’s create a new level adjustment layer by clicking on the Levels icon in your Adjustment palette (Figure 2). Alternatively, you can select a Level Adjustment layer from the layers palette toolbar.

In the Adjustment palette, slide your levels around to lighten the white colors and darken the darker ones. Usually, you will only want to increase the black point triangle by very little since the outlines of the eyelids as well as the pupils are already very dark. However, the white point triangle should be adjusted rather liberally, and the midtone point slider pushed slightly whiter by sliding it to the left. For this example, the black point was reset to 9, midpoint reset to 1.30, and the white point to 225 (Figure 3).

Do not care about what this adjustment does to the entire photo, just focus on the eyes. We will be masking out the level effect on the entire image shortly.

4. Click on the layer mask for the level adjustment layer that was automatically added and delete it by right-clicking and selecting Delete Layer Mask. You can also delete it quickly by clicking on the layer mask and drag-and-dropping it into the trash can located on your layers palette toolbar.

While holding down the ALT key, click on the Add Layer Mask button on your layers palette toolbar to add a black layer mask, which will hide the effect and allow us to only mask in what we choose (Figure 4).

5. Click on your brush tool and set your opacity to 40% and the Master Diameter large enough to cover the entire eye. Make sure your hardness is set to 0% so that we have a very soft brush. In one circular motion, mask in the entire eye AND the entire area around the eye (about one brush width outwards from the eyelids) so that we eliminate some unwanted shadows. With the same brush, this time mask only the eye and eyelids, and finally with a smaller brush, mask just the inner eye area. Our goal is to create a gradual and flattering brightening effect around the eye that increases in intensity as you move towards to the pupil area. The finished result should look something similar to Figure 5.

6. To finish, we are going to liven up the eye color a bit. Click on your base layer (the first layer under the adjustment layer) and then select your Oval Marquee tool, making sure the “add to selection” option is selected from the top toolbar (Figure 6). Select the entire iris area, adding to the small circles you create so that the selection is accurate. When finished, switch to the “subtract from selection” option, located just to the right of the “add to selection” option, and subtract the dark pupil area.

7. To finish the selection, click on the Refine Edge button on your top toolbar and adjust the feathering so that the edges of your selection are gradual and soft. Click OK when finished (Figure 7).

8. Add a new Hue/Saturation adjustment layer, which should automatically provide you with a layer mask that only affects the area we just selected. Increase Saturation to about 50%, or whatever you consider to look natural and vibrant (Figure 8).

As an optional edit, you can select your Burn tool and with a very soft brush set at an opacity of about 8%, burn the eyeliner and eyelid area slightly to add a smokey eyeshadow effect.

Eye editing is certainly not limited to just red-eye removal, and by using the tools provided in this tutorial, you can be ready for any imperfection the camera decides to throw your way!

5 ways to use less salt

Sodium chloride (salt) is essential to the body. The sodium in salt helps transmit nerve impulses and contract muscle fibers. Working with potassium, it balances fluid levels in in the body. But you only need a tiny amount of salt to do this, less than one-tenth of a teaspoon. The average American gets nearly 20 times that much.

The body can generally rid itself of excess sodium. In some people, though, consuming extra sodium makes the body hold onto water. This increases the amount of fluid flowing through blood vessels, which can increase blood pressure.

Most of the salt that Americans consume comes from prepared and processed foods. The leading culprits include snack foods, sandwich meats, smoked and cured meat, canned juices, canned and dry soups, pizza and other fast foods, and many condiments, relishes, and sauces — for starters. But enough comes from the salt shaker that it’s worth finding alternatives. Here are 5 ways to cut back on sodium when cooking or at the table:

1. Use spices and other flavor enhancers. Add flavor to your favorite dishes with spices, dried and fresh herbs, roots (such as garlic and ginger), citrus, vinegars, and wine. From black pepper, cinnamon, and turmeric to fresh basil, chili peppers, and lemon juice, these flavor enhancers create excitement for the palate — and with less sodium.
2. Go nuts for healthy fats in the kitchen. Using the right healthy fats — from roasted nuts and avocados to olive, canola, soybean, and other oils — can add a rich flavor to foods, minus the salt.
3. Sear, sauté, and roast. Searing and sautéing foods in a pan builds flavor. Roasting brings out the natural sweetness of many vegetables and the taste of fish and chicken. If you do steam or microwave food, perk up these dishes with a finishing drizzle of flavorful oil and a squeeze of citrus.
4. Get your whole grains from sources other than bread. Even whole-grain bread, while a healthier choice than white, can contain considerable sodium. And bread contains salt, not just for flavor but to ensure that the dough rises properly. You can skip that extra salt when you use whole grains outside of baking. Try a Mediterranean-inspired whole-grain salad with chopped vegetables, nuts, and legumes, perhaps a small amount of cheese, herbs and spices, and healthy oils and vinegar or citrus. For breakfast, cook up steel-cut oats, farro, or other intact whole grains with fresh or dried fruit, and you can skip the toast (and the extra sodium).
5. Know your seasons, and, even better, your local farmer. Shop for raw ingredients with maximum natural flavor, thereby avoiding the need to add as much (if any) sodium. Shop for peak-of-season produce from farmers’ markets and your local supermarket.

Food Photography: 5 Simple Ways to Get a Stronger Shot

by Natalie Johnson

Images by BananaGranola and SuperDewa.

1. Colour Values

Part of the attraction of food is the way it looks, so making sure your images exude the correct colours associated with the product. Before you begin shooting always take a white balance reading from a grey card if you have one or if you’re using a compact set the White Balance to a preset that matches the lighting environment 

you are shooting in.

2. Look for the Best Light

The best light for shooting food is soft and even, which is why a lot of it is shot in studios with large softboxes. But if don’t have expensive studio equipment to hand, position food in front of a clean window for the same effect, or if it’s a particularly bright day and you are getting shadows on your captures, veil the window with a white sheet or net to diffuse the rays or simply move the food further from the light source to diffuse its brightness. Alternatively if the weather is fair, consider pitching

up outside and shooting alfresco to add another element of interest to the frame.

3. Background

If you’re using a plate or work surface as the backdrop for your shoot, make sure it’s clean, tidy and no smudges of food plague the periphery. After shooting your first shot, zoom in during playback to be sure you haven’t missed anything that will result in hours of Photoshop cloning post-shoot. The backdrop and setting you use can ultimately enhance the message you want to achieve, so use this to compliment the food rather than detract from it; for example a wooden chopping board suggests rustic, an outdoor table says al fresco, square plates suggest minimalism, etc. Typically white backdrops carry connotations of image stock sites, so don’t be afraid 

to inject colour into the background using coloured sheets or card if item is small enough, for an added element of interest. When choosing the backdrop use a colour that compliments that of the food or reflects the vibe you want to portray, as darker colours can often influence thoughts of comfort and warmth, whereas lighter, brighter colours dictate ideas of freshness and frivolity.

4. Composition

Consider what makes the food look appealing and find a way to sell that feature. A wide aperture works well on products that are presented in rows or clusters and are easily identifiable such as; cupcakes, biscuits, and sweets etc.  If the product is small and plentiful, such as coffee beans or nuts for instance, consider cropping in close to fill the entire frame. Also consider your angle to add interest and sense of depth, scale and perspective. Make the most of interesting patterns and shapes by highlighting this as the focus. Including props to present the product can work well to convey a sense of scale or action, such as ladles, bowls, scales, pestle and mortar, or for drinks consider decorating the glass or backdrop with the fruit or flavours used in the ingredients.

5. Action

As well as photographing the finished article there is a lot to be said for in-progress recipe shots that show food actually being prepared. Consider shots that feature motion such as chopping, blending, frying, rising in the oven etc and using a longer exposure to convey the sense of motion and speed. But don’t forget the tripod!

Studio Lighting: Building a Light Set-up

by Alex Smith

57Studio flash photography often appears to be complicated and confusing for the new photographer.  The tangled, twisted mess of light size, power, angle, position, direction, etc… can be daunting to say the least.  Not to mention the need for extra equipment such as backdrops, light stands, modifiers, reflectors and the lights themselves. Wow! Already seems like too much huh? You might find yourself thinking, “I can just use the giant light source in the sky that is available everyday and be done with all this other mangled mess of an armamentarium.”  At times I would not disagree with you, as the natural light from the sun is hard to beat and is in great abundance, however, when I look at how much my understanding of light and shadow has improved from my many unsuccessful studio lighting shoots, the value of learning this sort of lighting is tremendous. And yes I did say “unsuccessful shoots!”

Strangely enough, when I got started with photography, studio lighting was one of the areas in which I was most interested. Not the easiest place to start I can assure you, but  it definitely does not need to be as awkwardly bemusing as it first appears. Now this article is not meant to be a full on detailed description of what lights or modifiers to buy or an in depth scientific analysis of the inverse square law complete with physics equations and Einstein like theorems.  It is more of a reason of why to get started with studio lighting and to break through any mental barriers that might be in your way.  I promise you, once you get your feet a little wet and wild in the studio, you will not only love it, but also find that you have a better eye for light even when you are out at the wee hours of the morning trying to capture that perfectly beautiful sunrise.

To shoot my studio work, I use simple, durable yet economically feasible equipment.  I currently use a set of Alien Bees strobes from Paul C. Buff. There are a lot of other brands of strobes out there, but these have worked well for me and fit within my budget.  Now, you do not necessarily need to use strobes. Westcott has their Spiderlite TD continuous lighting system that also could suffice. Basically any system of lighting can work fine. You could use a couple of lamps with a shower curtain liner to diffuse the light if you want. Don’t get too hung up on the equipment at first, but try to understand how to position and control the lighting to get the desired results.  I am trying not to get pulled into a discussion about equipment, but admittedly some equipment is required. In order to move on, I would recommend getting a good book or two on studio lighting to give you a thorough description of some lighting basics. Two that I have personally found useful are Master Lighting Guide for Portrait Photographers, by Christopher Grey or Basic Studio Lighting: The Photographer’s Complete Guide to Professional Techniques, by Tony Corbell. There was also a nice post here on DPS recently called One Light Portraits: Simple Elegance, by Rick Berk.

Whew! Let’s move on and get into some of the nitty gritty of setting up a studio portrait shoot. Lately, I have been working on some creatively themed portrait shoots as a personal project.  The basics of what you need for a shoot are simple. You need a background and a willing model or subject. This can be a plain wall in your house and a close friend or even some fabric taped to the wall with a bowl of fruit on a table in front of it. My theme was fire, so first I went to the fabric store and found an interesting black/grey charred looking swath. A quick aside, if you want to find some really cool backgrounds in the U.S. go to a fabric store around Halloween and they will have some really great stuff.  Next, I got a hold of a local model, the fabulous Brittney and set-up a time for the shoot. I also hired the amazing Dina Bree Nast a local make-up artist here in Denver, Colorado. I must say, and this is just my own opinion, but if you have never hired a make-up artist for a shoot, you have to try it as the results are spectacular and it will reduce your post-processing time tremendously.

Okay, the date, model, MUA and backdrop were set. Next and most importantly, how do I design the lighting set-up.  A little planning goes a long way with a studio shoot. When you are just getting started you do not want to have to deal with moving a lot of lights around or having your subject face the wrong way and have shadows in places where you do not want them. A sure fire way to avoid this is to first give your subject a stool or a chair to sit on. This will keep them in one place at the same distance and proximity from your lighting set-up and your background. Secondly, stick to one lighting set-up and limit the shoot to it. You want to focus on getting the shot that you want and not be constantly worried about fumbling with the lights. If you are more focused on the lights and everything else going on with the equipment, you will not pay attention to getting a great pose and expression and let’s be honest, the lighting can be less then perfect if you capture the right moment.  Finally, you would like to have an idea of what sort of depth of field at which you would like to shoot. If you want the background slightly blurred go with a wide open aperture of f/2.8-f/4. In my plan for this shot, I chose f/8 as I wanted to capture a bit of the look and texture in the background as I felt it complimented the shot. Additionally, I keep my ISO low which for my Nikon is 200 and my shutter speed I usually leave at 1/125 of a second. Thus, my camera settings are set already and I have not even taken a shot yet.

I always start my lighting set-up with the position and exposure setting of the main light or the one that will be responsible for lighting the subject.  In this shot, I already know I want my aperture around f/8 so that I can capture that background detail. This already let’s me know where I want my main lights exposure to be set. Now, there are two ways to set the main light’s exposure. You can use a light meter or you can wing it by taking some practice shots and checking your histogram and adjusting accordingly. Either way works well even though many people have opinions about one way or the other. Personally, I use a combination of both. So what about position of the light?

To start out with, I think using a glamour or butterfly lighting set-up (named for the shadow pattern created beneath the subjects nose) is very easy and is incredibly flattering for the subject. To achieve butterfly lighting the main light is set directly in front and slightly above the subject with the light angled down toward the subject. As a beginner, having the light directly in front of the subject is useful cause if the subject turns their head one way or the other they will still always be within the range of the main light. I used a 36-inch strip softbox in this set-up placed about 2-3 ft from the subject in the horizontal position to achieve a narrow, soft beam of light that would not spill onto the background very much. Then I took a few shots to see what it looks like.

As you can see with just the main light, the subject is adequately exposed, however, I cannot see the background and the subjects dark hair blends in so much with the background that you cannot see the outline of her hair. What does this tell me? I need to light the background as well as the hair to separate her from the background and gain some depth to the image. Since my theme was fire, I wanted to incorporate some colors that would support the theme. This made me think of reds, oranges and yellows. So to light the background I set a strobe just up off the floor angled up at the background with a standard reflector attached, however, I decided to place a red acetate gel over the light to give a little color to the background and support my theme. To set the power of this light I turned off my main light and took a few practice shots with only the background light on to see how it looked and adjusted the power of the light until I liked the look.

Here you can see with only the background light, I have a nice subtle red glow to the background that also brings out the interesting texture to compliment the fire theme of the shoot. The background light also wrapped around the subject just a little bit, likely bouncing a touch off the white surface of the softbox in front of her, giving a red tinge to the shadows. If I did not want this extra red in the image I could have moved my subject farther form the background, but I liked the effect so I left it alone.

Next, I needed to separate the subject’s  hair from the blending into the background.  I set up an additional light right behind the subject just below her shoulders and directed it with a standard reflector at the back of her head. I decided to add a yellow acetate gel over this light to hopefully give a bit of a fiery glow to the hair. Again I turned out the other lights and I took a few shots to see how it looked and adjusted it as needed.

As you can see, I now have a nice burning glow that highlights the outline of the hair and separates the subject form the background adding some depth to the image. I also get a little more of the yellow light reflecting of the strip softbox and filling in the shadows of the face with a bit of a golden tinge. When I looked back at the photo of the main light by itself I decided that this slight tinge would add some warmth into the shadow area and really compliment the photo. I have to admit this was a happy accident as a result of the light set-up.

Next, I took a few shots of just the background and hair light together to check how the two looked combined.

What do you think? A pretty nice combination that provided the shot with the fiery look I wanted, while also serving to bring out the background and help the subject stand out. To be critical, I was not pleased with the illumination of the subjects right ear, but I figured I could work with angles possibly to make it more subtle. Finally, I turned the main light back on and took a few more shots to see how all three lights looked together. I was very pleased with the result and felt that the little bit of red and yellow that spilled over into the shadows of the subjects face really helped to compliment the look and bring it all together.  At this point the light and camera settings were never touched and all I had to do was shoot and make sure I got the pose and expression I wanted, which when working with someone like the experienced Brittney was super easy. Is the light perfect? Definitely not, but it all comes together to produce a nice unique portrait.

I hope by going through my thought process step-by-step for this shot and by showing the effects of each light separately that it gives you a little insight into working with studio lighting and how you can construct an image one light at a time. Having total control of the lights is a bit scary, but once you start taking some baby steps with it, I promise you it will make all aspects of your photography better. Studio lighting is all about the direction and intensity of light and how it transitions and compliments into shadow. Wait, isn’t that what all photography is about? So go ahead and jump in head first. Inevitably, you will make a lot of mistakes, have many over and underexposed images, and end up with plenty of shots of which you are not proud, however, you will also absolutely get some fantastically, fascinating photos and learn a lot about the the interplay and visualization of light and shadows.  Plus, let’s be honest, don’t we have these same problems with any shoot? Any shot involves the light, background and subject and how we decide to capture and expose the image. Being able to control the light should actually make getting a great capture easier.

How to Use Bracketing in Your Photography

by Bill Jones

Many people consider bracketing to be an option for advanced photographers only. However, it can be a tool that anyone can make use of in order to create the perfect image. It is not hard to learn how to bracket an image, and once you start using this tool, you will likely find yourself turning to it over and over again.

Would you like to learn more about bracketing and what it can do for your photography?

Just what is Bracketing?

If you have never heard of bracketing before, then your first question may simply be, what is it? This tool gives you more control over the exposure of your image. It actually makes use of three different images of the same subject. In essence, you will take one image at the exposure that you think is correct, an image a step below that exposure and an image a step above that exposure. In this method, you will have a much better chance at getting the absolutely perfect image.
How do you use bracketing? Different cameras have different control options, so you will need to learn about each of them in order to determine which you will need to use with your own digital photography.

The Type of Bracketing

There are different types of bracketing and not all cameras will allow for every single one of them. You will need to learn which of them will be correct for your camera and your digital photography. There are three main types of bracketing that digital SLR cameras will allow:

Exposure Only
Flash Exposure Only
White Balance Only

Some cameras will have different options. For example, the Nikon brand includes something called Active D Lighting feature and Nikon cameras will allow you to bracket this for more detail in the shadows and highlights.

In order to learn how to use bracketing, you will need to experiment with these different types. Flash bracketing can be useful when photographing close subjects so that you can make sure you get an image that is not washed out or too dark. Exposure or white balance bracketing can be useful with all types of images so that you can get the best color, the best contrast and the overall best image.

Bracketing Step By Step

Now that you have a better understanding of how bracketing works, you must be wondering how to put it into action. For a while, you may find bracketing to be a little confusing or overwhelming. However, the more that you use it, the more familiar you will become with it. Once you are completely familiar with bracketing, you will be ready to use it in almost any image that you take. Here are the steps that you will need to take in order to put bracketing to use.

1. Choose the type of bracketing. As mentioned, you may have choices for your digital photography depending on your camera.

2. Choose the number of bracketed exposures that you want. Different cameras give you different choices on this. The Canon brand will give you simply the option of the most popular bracketing of three images. The Nikon brand and some other brands will give you the ability to choose many different bracketing options, including anywhere from 2 frames to 9 frames.

3. Choose the increments for bracketing. If you are trying to fine tune an image, you will want to select a very small bracketing increment. If you want a wide range of choices, then you will want to choose a bracketing increment that is much higher. For minor adjustments, consider choosing 1/3 stop. For major adjustments, you could choose bracketing up to 1 stop. Different cameras will allow for different bracketing increments as well.

4. If you have a Canon DSLR, then you will have the option to set the zero point. This means that your camera will create an image with absolutely the best automatic exposure based on the camera’s own metering system. The zero point will be the image of which all the other images will bracket around.

5. Taking the picture. You have two different choices for taking the picture. You can take the picture in single shot mode. When you do this, you will need to press the shutter release for all of the bracketing images. If you do not want to do this, then you could choose to change your camera to burst shot mode. When you do this, you will be able to hold down the shutter release and take all of the bracketed images in one burst.

6. Reset your camera. When you are done with the bracketing image, you still need to take one more step. That would be to turn bracketing off. Your camera will not turn off the mode automatically and you could end up ruining future images.

\Using Bracketing with HDR

As mentioned in another article, your camera will have something called HDR, which is a great help to digital photography. HDR stands for high dynamic range and it simply means that your camera sensors will have a greater range of exposure for even more fine tuned images. In order to make use of bracketing with HDR, you will need a photo editing software like Adobe Photoshop. With this method of bracketing, you will make use of your camera’s full exposure range in order to take several pictures. You will then import the image into the editing software and use the software’s tool to merge. This tool will be called Merge to HDR in Photoshop.

Why would you want to do this? Have you ever noticed that in certain situations, part of the image will be very dark or very light no matter what you do? You can use this type of bracketing to get the right exposure on the light parts and then the right exposure on the dark parts. By combining the two, you will be able to create the perfectly exposed image overall.

Bracketing can truly be a powerful tool once you know how to use it. You will find that you can get better images and better exposures for those images on a regular basis.

Top image by Mike Baird

how to shoot a beautiful graduation photo

Graduation season again! Wearing graduation gowns moment, also entered a symbol of a new life stage, of course, want to leave an eternal happy memories with loved ones, you ready photographed beautiful moments? Let us introduce the elements of graduation photography it!

By Isaac also / hellokit the

Hardware equipment

Since the friendly family and friends come to celebrate, the group photo is of course essential. The shooting group photo suggestions with tripod and wide-angle lens , in order that all included in the King, anti-shake, and photographed the gate / Department of the door plaque. The permit with teleconverter head to take close-up images (such as the moment of the ceremony, award certificates), to capture the best look. If shooting with a long mirror graduation ceremony, consider using a monopod toincrease stability, reduce hand tremors opportunity I can to maintain a certain degree of mobility.

By cassetteject

Camera settings

Shoot a group photo, the best aperture settings F5.6 or impact by the depth of field in order to avoid the portrait subject; shutter set to slightly higher than the safety shuttercoefficient, in order to reduce tremor and photographed failure photo; picture quality Please consider Raw (if only two a choice, it is recommended to use the RAW) and JPEG simultaneously, so you can quickly back to browse while camera for partial repair, can also be raised in post-production photo tolerance. Need to set the flashing lights , please photometric amount transferred weak, more use of the available light. Such as a wide-angle lens to shoot a group photo, to pay attention to the problem of lens distortion, such as the lens is 24-70mm, wide angle to shoot as much as possible not to use the left and right sides will be stretched because the lens becomes. Similarly metering should pay special attention to the camera's metering might think, mostly black graduation gown, dark environment and lengthened exposure time, so that the person's face appears overexposed, shooting a close-up of the most common problems, then you can the use of the camera's spot metering measured position of a face to resolve the problem of exposure.

By Manaf

Shooting graduation phase techniques

Some graduation photo can not be missing scenes and posture in this column points for reference:

The campus door / classroom building / group photo

The wide-angle lens + from waist height up shooting By ybysforgan_jack

Award certificates moment

High shutter + aperture + level shooting By Richard Kwan

Throwing Quartet cap

High-speed shutter (at least 1/250 or faster) + inhibition Photo / down shooting By Jarnott from a height

Site selection

In addition to the the general friend more than a campus-wide shooting graduation photo, Hong Kong Park, Tai Po Waterfront Park , Cyberport or Disney are shooting a popular place for graduation photo, if you have other memorable places (such as dormitories, stations, etc.), Of course, also can be used to take the picture. Please pay attention to more graduation photos for group photo, good routes and timing, pre-designed or pre-line time and avoid wasting time on the same day in the real-time trip planning.

Graduation is an important life events, but the shooting of graduates is not difficult to imagine, as long as the individual shooting skills with the scene changes done enough preparation in advance, you can capture beautiful graduation photo! Finally, I hope that you can quickly master the above skills, photographed a series of beautiful graduation photo series for family and friends!